View TFS400H_1324599.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TFS400H.doc
version 1.1
11.01.2002
VI TELEFILTER
Measurement condition
Ambient temperature: 23 C Input power level: 0 dBm Terminating impedances *) for input : 385 for output : 385 External coil : 67 nH
Filter Specification
TFS 400 H
1/5
-1,05 pF -1,05 pF
Characteristics
Remark:
Reference level for the relative attenuation a rel of the TFS400H is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae . The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 3 dB filter attenuation level relative to the insertion loss a e. The nominal frequency fN is fixed on 400 MHz without tolerance. The given values for the relative attenuation a rel and for the group delay ripple have to be reached at the frequencies given below also if the centre frequency fc is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fc.
Data
Insertion loss (Reference level) Nominal frequency Centre frequency Usable signal bandwidth 3 dB bandwidth Relative attenuation fN ... fN fN 400 kHz ... fN 600 kHz ... fN 1 MHz ... Group delay ripple fN 70 kHz BW arel 70 kHz ae = amin
fN fc
typ. value
3,6 400,02 362 0,7 25 42 54 0,4 TC - 0.036 ppm/K kHz dB dB dB dB s MHz dB
tolerance/limit
max. 6,5 dB
400,000 MHz
min.
140 -
kHz
max. min. min. min. max.
3 15 27 35 2
dB dB dB dB s C C
fN 600 kHz fN 1 MHz fN 13 MHz GD
Operating temperature range Storage temperature range Temperature coefficient of frequency Frequency inversion temperature
- 20 C ... + 70 - 35 C ... + 85
+ 20 C
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.
Generated: Checked / approved:
VI TELEFILTER Vectron International Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS400H.doc
version 1.1
11.01.2002
VI TELEFILTER
Construction, pin configuration and 50
(All dimensions in mm)
Filter Specification
- matching network
TFS 400 H
2/5
7
5
1,78
400 H P03
1
Date code
3
1,1 Max.
2,54
Pin Pin Pin Pin
1 2 3 4,8
Sym. Output Sym. Output External Coil Package Ground
Pin 5 Pin 6 Pin 7
Sym. Input Sym. Input Ground
Date code: M N P ...
Year + week 2000 2001 2002
50 Ohm Test circuit 1
LB-IN L1 6 1 L3 LB-OUT
C1
SAW
5 3 4, 7, 8 L5 2
C2
L2
L4
50 Ohm Test circuit 2
LB-IN
C1
6
1
C3
LB-OUT
L1
SAW
5 3 L3 2
L2
C2
C4
4, 7, 8
VI TELEFILTER Vectron International Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS400H.doc
version 1.1
11.01.2002
VI TELEFILTER
Stability Characteristics
Filter Specification
TFS 400 H
3/5
After the following tests the filter shall meet the whole specification: 1. Shock: 2. Vibration: 3. Change of temperature: 4. Resistance to solder heat (reflow): 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 -55 C to 125C / 30 min. each / 10 cycles DIN IEC 68 part 2-14 Test N max. 2 times reflow process; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
Packing
Tape & Reel: IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: Reel of empty components at start: Reel of empty components at start including leader: Trailer 3000 min 300 mm min 500 mm min 300 mm
Tape (all dimensions in mm) W : 12 0,3 Po : 4 0,1 Do : 1,5 + 0,1 E : 1,75 0,1 F : 5,5 0,05 G (min) : 0,75 P2 : 2 0,05 P1 : 8 0,1 D1(min) : 1,5 Ao : 4,3 0,1 Bo : 4,3 0,1 CT : 9,5 0,1
Po
EMBOSSED CARRIER TAPE
Do
P2
E Ao F W
D1 CT Bo
G
P1
COVER TAPE
W2
Reel (all dimensions in mm): A W1 : : 330 12,4 + 0,2 18,4 50 13 + 0,5 / -0,2
A C N
W2 (m ax) : N (m in) : C :
W1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on the right side of the tape.
VI TELEFILTER Vectron International Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS400H.doc
version 1.1
11.01.2002
VI TELEFILTER
Air reflow temperature conditions
Filter Specification
TFS 400 H
4/5
1st and 2nd air reflow profile
Name: Temperature: Time: pre-heating periods 150 C - 170 C 60 sec. - 90 sec. main-heating periods over 200 C 20 sec. - 25 sec. peak temperature 255 C 5 C
Chip-mount air reflow profile
260 240 220 200 180 temperature / C 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 time / sec. 140 160 180 200 220 240
Table for temperature vs. time during the air reflow process Tolerance of temperatures: 5 C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / C 160 161 164 170 180 205 230 255 230 205 180 165 140 120
VI TELEFILTER Vectron International Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
TFS400H.doc
version 1.1
11.01.2002
VI TELEFILTER
History
Version 1.0 1.1 Reason of Changes - Generation of specification.
Filter Specification
TFS 400 H
5/5
Name Dr. Wall Dr. Wall
Date 15.09.2000 08.01.2002
- Change from development specification to filter specification. - Add termination impedances. - Add typical filter data. - Correct reel information. - Change stability characteristics. - Add pinning to package drawing.
VI TELEFILTER Vectron International Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

▲Up To Search▲

Price & Availability of TFS400H

	To Download TFS400H Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .